OEM VKP80III Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 96

OEM VKP80III Скачать руководство пользователя страница 67

7.8

True Type Font

In VKP80III emulation, it is possible to use TrueType fonts. To be used, a TrueType font must be monospace type
(every character of the font must have the same dimension). The check is made by the printer when the font is selected.

TrueType fonts will be automatically scaled by the printer in order to obtain the same available width for the embed-
ded fonts (11, 15 and 20 cpi).

The quality of TrueType fonts and the correct positioning into the printable area will result from the font producers and
the font implementation.

The available code tables are : PC437, PC850, PC860, PC863, PC865, PC858, PC866, PC852, WPC1252.

For the correct printing of the code tables, it is necessary that the selected TrueType font contains all the characters
in the tables. Otherwise, the ‘ ’ symbol will be printed instead the missing character. All commands for printing con-

fi

guration are usable both with TrueType fonts and with embedded fonts. It is possible to address the TrueType font

respects the UNICODE™ standard (see www.unicode.org), by using UTF-8 or UTF-16 encoding.

7. SPECIFICATIONS

User Manual

VKP80III 67

«
...
65
66
67
68
69
...
»

Содержание VKP80III

































































































Отзывы:

Нет отзывов