TOYOTA
Reference
450Q
Procedure
Issue B 5/23/16
Page | 3
f.
Using a 10mm socket wrench, remove the four
bolts holding the radio in place.
(Fig. 2-5)
g.
Disconnect connectors and antenna lead.
(Fig. 2-6)
h
. Remove radio and store.
3.
Quick-Sync Wiring Harness Installation
a.
With the quick sync wiring harness in hand, run
the yellow power wire through the radio cavity
towards the driver side kick panel.
(Fig. 3-1)
b.
You will want to run these wires full length to the
point where the OEM Audio + 10-pin and 6-pin
male and female connectors rest in the radio
cavity.
(Fig. 3-2)
Fig. 3-1
Fig. 2-6
Fig. 2-5
10mm Socket
Fig. 3-2
