TOYOTA
Reference
450Q
Procedure
Issue B 5/23/16
Page | 16
e
. Disconnect window/door lock control
connectors from the panel. Use of a pick tool
or precision screwdriver is needed to
release connector.
(Fig. 10-4)
f.
Disengage door locking tab.
(Fig. 10-5)
g.
Use panel tool to disengage the clips behind
the door panel one at a time. Start at the
bottom, then the sides and finish at the top.
Use gentle force to remove door panel.
(Fig. 10-6)
h.
Remove door latch assembly from door
panel by unsnapping and lifting the latch
connectors. Connectors need to be
reassembled in the same orientation (White
on top, Green on bottom.)
(Fig. 10-7)
i.
Set Door panel aside
Fig. 10-4
Fig. 10-5
Panel Tool
t
Pick Tool
_
Fig. 10-4
Fig. 10-7
Fig. 10-6
Panel Tool
t
