OEM Audio Reference 400CF, Руководство пользователя

Страница: 6 / 23

TOYOTA Reference
400CF
Procedure
Issue A 8/14/14 Page | 6
i.
Run the sub umbilical gray connector through
the radio cavity to the driver-side kick panel. You
want this wire the same length as the black sub
amplifier connector.
(Fig. 3-11)
j.
Run the other side of the sub umbilical (with the
white connector) to the passenger-side kick
panel area. Run the cable over the air filter
avoiding any binding along the way. Wire tie as
necessary.
(Fig. 3-12)
k
. Plug your OEM Audio Plus quick-sync wiring
harness connectors into the back of your radio.
Plug in the remainder of your radio connectors
and reinstalled radio, bezel and trim.
(Fig. 3-13)
4. Subwoofer Umbilical Installation
a.
Remove the passenger side threshold by pulling
in an upward motion.
(Fig. 4-1)
Fig. 4-1
Fig. 3-11
Fig. 3-12
Fig. 3-13