OEM Audio Reference 400CF, Руководство пользователя

Страница: 3 / 23

TOYOTA Reference
400CF
Procedure
Issue A 8/14/14 Page | 3
f.
Using a 10mm socket wrench, remove the four
bolts holding the radio in place.
(Fig. 2-5)
g.
Disconnect connectors and antenna lead.
(Fig. 2-6)
h
. Remove radio and store.
3. Quick-Sync Wiring Harness Installation
a.
With the quick sync wiring harness in hand, run
the yellow power wires, gray, white, and black
amplifier connectors, and 10 mm ground
terminal, through the radio cavity towards the
driver side kick panel.
(Fig. 3-1)
b.
You will want to run these wires full length to the
point where the OEM Audio + 10-pin and 6-pin
male and female connectors rest in the radio
cavity.
(Fig. 3-2)
Fig. 3-1
Fig. 2-6
Fig. 2-5
10mm Socket
Fig. 3-2