https://oelmann-elektronik.com
LX8 Pager User Guide
B248.02.22
© 2022 Oelmann Elektronik GmbH
4 / 17
Attaching the battery
Relocate the battery door and use thumb and forefinger to click the battery door clips securely into
place.
IMPORTANT NOTE: PLEASE DO NOT REMOVE THE BATTERY UNTIL THE PAGER IS COMPLETELY
POWERED OFF.
Charge battery
Remove the rubber charging port cover and connect the charger cable to the pager.
Charging will automatically stop when the battery is completely charged – the battery icon
will be full (in status line).
Carefully remove the charger cable and replace the rubber charging port cover.
If you use a desk charger keep charging pads clean. If you need to store the chargeable
battery for a long time do it in a half-charged state (not completely discharged or charged).
Initial battery charge
Please ensure that you charge a new battery for 6 hours before general use, this will
ensure the new battery is fully charged.
Factory-new batteries reach their maximum possible capacity after several cycles of
charge and discharge, only.
TURN PAGER ON
Press and hold lower right button to turn pager on.
NOTE: THE PAGER TURNS ON AUTOMATICALLY AFTER INSERT BATTERY.
PIN coded
If the pager is protected against unauthorized operation, then the PIN code has to be
keyed in, only after the battery was inserted.
