https://oelmann-elektronik.com
LX8 Pager User Guide
B248.02.22
© 2022 Oelmann Elektronik GmbH
16 / 17
IMPORTANT NOTE: PLEASE DO NOT REMOVE THE BATTERY UNTIL THE PAGER IS COMPLETELY
POWERED OFF.
CONTRAST (SERVICE MENU)
To adjust display contrast please turn the pager off.
Turn the pager in service mode by the pressing following buttons in sequence.
Lower contrast
Higher contrast
Next service menu step / leave service menu
PAGER DISABLED
In case the pager displays
PAGER DISABLED
it cannot receive messages any longer because
battery is low, pager is damaged or the rescue coordination center disabled the pager.
PROGRAMMING PAGER
The pager can be adapted individually to your needs by programming.
Any function may have been disabled during programming so that it is not available on pager.
Programming is done via computer and programming kit (adapter and programming software).
EMERGENCY STATUS MESSAGE
GSM or Wi-Fi option.
Press and hold the “function” button starts the emergency countdown. While the countdown
runs the emergency status message is canceled by pressing the “read” button
. Otherwise the
emergency status message will send after countdown.
MAINTENANCE
•
Check battery, regularly.
•
Clean the pager as required using a moist cloth.
•
Under no circumstances must strong solutions as methylated spirits, petrol or nail varnish
remover be used.
260.0110-38B-1130
946TLU0119
00012E2E01214300
