4 Display
1:
Display for scanning and measuring
2:
Display for holding and keeping the last measurement
3:
Display of emissivity
4:
Selection of °C or °F
5:
Main temperature display
6:
Low voltage warning
7:
Function transformation zone
5 Operating instructions
OEG Dual Laser Infrared Thermometer
GB
9
160 mm
15 mm
60 cm
5 cm
120 cm
10 cm
Temperature measurement
1.
Point the instrument toward the surface to be measured and press the trigger.
2.
The following measured values are displayed: temperature, maximum temperature, minimum temperature,
difference value, average value, high alarm, low alarm, external probe (not included in this product).
3.
Release the trigger and the reading will hold for approximately 7 seconds on the display. After approx. 10 seconds,
the measuring instruments switches off automatically.
When the instrument is on, select the temperature units °F or °C by pressing the MODE button for approx. 2 seconds.
Dual laser measuring spot
The laser distance is within 120 cm to the measuring spot. Depending on the distance, this spot has a different diameter
(see illustration).
Laser’s On and Off
1.
Press and release the trigger.
2.
While HOLD is displayed, press the backlight button to activate/de-activate the laser.
3.
The backlight status will be stored in memory until changed.
