OEG CPA-E 100 Series, Руководство пользователя

Страница: 49 / 100

49 OEG CPA-E 100 series
High-efficiency wet-running circulation pump with screwed or flanged connection
13. Troubleshooting
Warning
Ensure that the power supply is switched off
before the pump is maintained or repaired.
Failure Cause of failure Remedy
Pump cannot Fuse blown Replace fuse
be switched on Circuit breaker Connect the
not connected circuit breaker
Motor failure Replace the pump
Undervoltage Check the power supply
Pump blocked Clean the pump
Noisy system Air in the system Bleed the system
Flow rate too high Increase the inlet pressure
Noisy pump Air in the pump Bleed the system
Inlet pressure too low Increase the inlet pressure
Not hot enough Poor pump Increase inlet
performance pressure
WARRANTY
OEG grant a warranty of 36 months for the CPA E pumps against
defects in material and workmanship. The warranty period starts
with the date of purchase.
The general terms and conditions of OEG apply to CPA-E pumps.
In case of breaching § 6 Deficiencies/Warranty the warranty will
expire prematurely.
GB