30
Manual mode
8.3
Heating or cooling operation
mode selector
9
.0
This mode is used for testing the system or in case
of malfunction. Every output can be manually acti-
vated
or deactivated.
Move with the buttons and between the in-
dividual outputs R1, M- or M +. The output, which
you want to change is selected by pressing the but-
ton .
ON, OFF or AUTO starts flashing. Now the output
can be changed using the buttons and . The
setting is confirmed by pressing the button .
Exit the setup menu with the button.
You set the exact time and date in the following
manner:
By pressing buttons and move among
individual data. By pressing button you select
data that you want to change. When data flashes,
change it by pressing buttons , and confirm
it with the button .
Exit the settings by pressing the button .
The required user language is selected by pressing buttons , and confirmed with
button . Exit settings by pressing the button .
The menu is intended for language,
time, date and display settings
Heating operation mode is active.
Cooling operation mode is active.
Basic settings
10
.0
Language selection
Time and date
Constant temperature controller
GB
