How to Start/Stop the Motors
How to Start/Stop the Motors
1. Once your units are paired, you’re ready to arm the motors—to get the propellers
spinning. Start the motors by pushing both sticks at the same time. Simultaneously
push the left hand throttle stick to the 7 o’clock position and the right-hand throttle
stick to the 5 o’clock position. The propellers on the quadcopter will start to spin, not
enough to lift the quadcopter, but they’re ready for command to take off!
2. To stop the motors (for example, after landing), again push the sticks at the
same time to the 5 and 7 o’clock positions and hold them there for 2 seconds. The
propellers will stop spinning.
1
2
12
13
2 sec.
