How to Maintain Your Battery
Remote Control Battery Rederence
26
27
PLEASE REFERENCE THESE NOTICES ON THE BATTERIES FOR THE REMOTE CONTROL
Your Drone is furnished with a removable, rechargeable battery. Please pay careful
attention to the following safety instructions:
1. Use only the charging USB cord provided by Odyssey Toys for charging.
2. When charging the battery, if the battery is too hot it means the battery is
overcharged. In such a case, stop charging the battery immediately. Overcharging
could damage the battery permanently.
3. After flying, the Drone’s battery temperature may be relatively high. Wait 10 minutes
until the battery has cooled before recharging.
4. Turn off both the Drone and Controller whenever it is not in use. If you don’t plan on
flying your Drone for a time, charge the battery for about 1 hour before storing it.
Caution: There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to local laws. Never leave this product
unattended while charging—this can be a fire hazard.
Use only AAA non-rechargeable battery or AAA rechargeable battery in the controller.
Do not mix the two types.
Insert batteries with correct polarity.
Do not short circuit the supply terminals.
Lithium ion batteries can be flammable if misused.
Do not mix old and new batteries.
Do not mix alkaline batteries, standard (carbon-zinc), or rechargeable
(nickel-cadmium/NiCad) batteries.
Remove exhausted or drained batteries.
Remove rechargeable batteries before charging them.
Remove and store the batteries away from the Controller when not in use to avoid damage
from battery leakage.