CONTINUED »
MENU SYSTEM
INPUT STATUS
(RECORD MODE ONLY)
29.97 4K
S-LOG2
Displays current video input signal type. Tapping button brings up detailed information on
Input and Output signals, record mode and frame rates.
INPUT CONTROL SETTINGS
VIDEO CADENCE:
This identifies the cycling of the signal coming into the
Odyssey7Q and how it is to be recorded.
AVAILABLE CADENCES:
PROGRESSIVE/PSF:
For video signals structured
as True Progressive (p) or Progressive Segmented
Frames (PSF).
INTERLACED:
For HD video signals structured as
interlaced fields (i). Records a 1080i60 video signal
without alteration. Note that some cameras carry
progressive video embedded within an interlaced
signal. See 3:2 Pulldown below.
REMOVE 3:2 PULLDOWN (TO 24P):
For 24p video
signals striped within a 60i signal. Extracts the 24p
video, records it as 1080p24 and discards the excess
fields for greater efficiency and smoother post.
TIMECODE SOURCE:
Allows selection for origination of timecode. Note that
some video sources do not carry timecode data and at high
frame rates some cameras do not generate timecode. In
these cases the Odyssey7Q will generate a Record Run
timecode from its internal clock. LTC not supported when
recording ARRIRAW.
AVAILABLE TIMECODE SOURCES
SDI/HDMI
(embedded in incoming signal)
TC
(input from external source to LTC port)
TIME-OF-DAY NDF
(Odyssey7Q internal clock, non-
drop frame counting)
TIME-OF-DAY DF
(Odyssey7Q internal clock, drop
frame counting)
SEED/RECORD RUN
(Set timecode counter,
increments while recording)
OUTPUT CONTROL SETTINGS
OVERLAYS
On/Off control to replicate OLED Image Analysis tools
display over the image on the SDI and HDMI outputs.
REC TALLY
On/Off control to activate Tally record status indicator over
SDI and HDMI outputs. Tally appears as a colored bar at
bottom of image. Green Tally indicates ready to record and
Red Tally indicates recording in progress.
24