Odys Mpix5, Руководство пользователя

Страница: 66 / 90

20
GB
The method described above can also be used to delete video clips and
sound recordings.
Caution
Formatting deletes all unprotected data.
Protected data is not deleted but can be formatted. See page 28
for instructions on protecting and unprotecting data.
Advanced operation
1. Using the flash
If there is not enough available light for your photo, the built-in flash can
provide the additional light required.
1
Switch the camera on and select the photo mode (single shot
or self-timer mode).
2
Press the flash button once or repeatedly to set one of three
flash modes. The flash mode changes from “Auto” to “Always
on” to “Off” each time you press the button. The corresponding
status symbol for the flash mode is shown in the upper left
corner of the LCD.
The flash is activated automatically when the light level is too low if
the flash is set to “Auto”. When “Always on” is set the flash is used
for every shot. When “Off” is selected, the flash is deactivated.
The flash only works in single shot mode and self-timer mode.
It does not work in burst and video mode.
Please note that using the flash increases battery consumption.