Odorox BOSS XL3, Руководство пользователя

Страница: 6 / 11

Note: The Odorox® Boss XL3™ Unit
requires an external air mover to
function (not supplied with Boss XL3™
Unit). The air mover must be operating
on high speed and situated as seen in
the adjacent picture to activate the
Boss XL3’s vacuum switch allowing
the unit to function
POWER ON
The red “POWER ON” LED will turn on when the Boss XL3™ Unit is plugged
into a proper power source. With the red “POWER ON” LED turned on, the
Boss XL3™ Unit can be powered on by turning the “PROCESSOR” switch to the
“LOW” or “HIGH” position (refer to Note above). The green “PROCESSOR ON”
LED will indicate when the Boss XL3™ Unit has either two or three Odorox®
hydroxyl generating optics functioning.
POWER OFF
The main power for the Boss XL3™ Unit can be switched off by turning the
“PROCESSOR” switch to the “OFF” position.
PROCESSOR
The Boss XL3™ Unit is equipped with three Odorox
®
hydroxyl generating
optics. With the “PROCESSOR” switch in the “LOW” position, two optics will be
functioning. With the “PROCESSOR” switch in the “HIGH” position, three optics
will be functioning.
OPERATING THE ODOROX
®
BOSS XL3™ UNIT