5. How to connect the bar lines to your kite
Odo Kiteboarding Kites have been designed to perform at the very best when using exclusively Odo Kiteboarding
Quick Vario Bar, please refer to Odo Kiteboarding Quick Vario Bar manual
1.Attach the knot of the back line to the head loop at the end of the pigtail tip.
Pay attention that the red line from the bar needs to be attached to the red attachment point on the kite and the blue
line from the bar needs to be attached to the blue attachment point on the kite
2. Repeat this procedure for the front line. Here, the knot is located at the pigtail attached to the kite and the front lines
are grey
6. Packing up the Kite
1. Make sure to open each strut cleat and exhaust the air from the kite through the deflate valve on the end of the tip.
2. Roll the kite up starting from the wingtip opposite to the deflate valve for almost ¾ of the kite length then roll it up
from the opposite wingtip.
3. Fold the kite in 3 parts and store it in the kite bag.
K1 - YO Kite User Manual
9
