50
NOTE: After the vehicle must be
parked, use the 2WD/4WD selector
(engaged or disengaged). When
driving, if the selector is used,
mechanical damage may occur.
NOTE: Whether the rear wheels
rotate, release the throttle, and wait
for the engine to return to idle before
selecting the four-wheel drive mode.
4WD position
When the selector is pushed to the
left, the 4WD mode is used.
2WD position
When the selector is pushed to the
right, the 2WD mode is used.
(3)Mechanical parking brake
The parking brake is located on the
right side of the lever. When leaving
the vehicle, move the joystick to the
right (approximately 170°), it can
prevent the vehicle from driving
away. When using the vehicle, turn
the joystick to the left.
TYPICAL
1. Mechanical parking brake
2. Parking brake
3.Normal state
NOTE: When parking the vehicle on
a slope/road, the parking brake must
be used or the vehicle may move
freely and may cause an accident to
you or others.
Normal state