11 Measuring Procedure
Instruction Manual Pentacam® AXL (G/70100/EN 1121 Rev04)
37 / 85
Go to measurement
During the measurement of both eyes the following messages may occur.
Note
The axial length values do not correspond to the values of the normal
population.
Check the axial length values of both eyes.
The plausibility is marked by a yellow flagged QS value. This will be stored
in the Pentacam® AXL programme accordingly.
This symbol, related to the messages appears for example in the IOL
calculator.
Click on this symbol to show the corresponding message.
You must check the corresponding measured value.
1 Message with instructions
Fig. 11-4: Pentacam® AXL: Proceed with 3D-Scan
1
Fig. 11-5: Message: Plausibility check