background image

4

FEATURES

Integrated RCD Type B

LCD Screen & RFID Reader

Self-Monitoring & Recovery

OCPP 1.6J Full Profiles & Smart Charging Support

PRODUCT OVERVIEW

The Ocular IQ Commercial is designed to meet and comply with the AS/NZS3000:2018  

Wiring Rules.

With an integrated RCD Type B, the installer will only need to install a Type A RCBO  

at the distribution board.

The Ocular IQ Commercial is equipped with a 7 inch LCD screen allowing users to know the 

status of the charger. Details about the LCD screen can be found on pages 10 – 12.

The Ocular IQ Commercial charger comes with an inbuilt RFID reader to allow for access control 

to the charging station. The RFID Reader is compatible with all  ISO 14443 A/B RFID Cards.

The charger will automatically resume charging after a minor fault such as OVP, UVP, OTP or 

OCP with no user intervention required.

The charger supports OCPP 1.6J full profiles, including the latest smart charging to balance  

the load of charging stations with limited power supply.

1

1

2

3

4

5

6

Wi-Fi & 4G Antenna

LED Indicator

Optional Programmable Start/Stop Button

7” LCD screen

RFID card reader

Universal Type 2 Socket

2

4

5

3

6

Содержание IOCAW05C-22S













Отзывы: