Octave V 80 SE Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 48

background image

25

7. ADVANCED FUNCTIONS

7.2.1. Inserting an external equalizer

External equalizers or signal processors are used to counteract the effects of the listening room or
to adjust the loudspeakers to suit the listening room.
Note: In the "Extern" setting, the external processor is connected to the power amplifier input. You
may hear pops and clicks when you switch the processor on and off, irrespective of the technology
employed by the processor. We therefore recommend that you switch the processor on before you
switch on the V 80 SE, or before you switch the "Extern" function on. (see Chapter 3.7 Connection
options: overview). Please check the instruction manual for your effects unit/processor for
information on the unit's analogue inputs and outputs.

7.2.2. Using the V 80 SE as a 2-channel power amplifier with an external
preamplifier

The Extern function also allows you to use the V 80 SE as an independently adjustable power
amplifier together with an external preamplifier. Connect the preamplifier to Master In, with the
mode selector knob [8] in the Extern position. In this mode, you retain the use of the V 80 SE's
volume control. When using this option, you should generally set the volume control on the V 80
SE to maximum and adjust the volume with the external preamplifier.

7.2.3. Using the V 80 SE in bi-amped systems – application 1

The V 80 SE as an independently adjustable power amplifier

Bi-amping is a variant of the above. In a bi-amped system, the V 80 SE power amplifier section
would typically power the mid-high section of your speakers, with a second power amplifier driving
the bass section. Ideal are a preamp with two outputs per channel and at least one power amplifier
with its own volume control. You need to be able to adjust the sensitivity of at least one of the
amplifiers in order to balance the output levels of the two power amps. You can use the volume
control on the V 80 SE to do this. The calibrations on the front panel will enable you to reliably
repeat your settings. Connect the V 80 SE as shown in Chapter 7.2.2. Connect the bass power
amplifier to the second output on the external preamplifier.

Possible configurations of the V 80 SE in bi-amped systems
Option 1: V 80 SE in the external mode as independently adjustable power amplifier

«
...
22
23
24
25
26
...
»

Содержание V 80 SE

















































Отзывы:

Нет отзывов

Похожие инструкции для V 80 SE

Бренд: T-audio Страницы: 13

Бренд: Velleman Страницы: 28

Бренд: Viking Страницы: 4

Бренд: DaytonAudio Страницы: 2

Бренд: OPTON Страницы: 10

Бренд: AMERITRON Страницы: 19

D:CORE STEREO 10

Бренд: Blackstar Страницы: 10

Бренд: Fender Страницы: 8

ZOTL40 Reference

Бренд: Linear Tube Audio Страницы: 8

Бренд: Paradise Datacom Страницы: 82

Бренд: Gold Note Страницы: 52

Acoustasonic 30

Бренд: Fender Страницы: 16

Бренд: QUAD Страницы: 16

TransAm TA 1800

Бренд: Autotek Страницы: 32

Бренд: Arcam Страницы: 13

Бренд: Altronics Страницы: 4

Бренд: Alcad Страницы: 8

Бренд: Harman Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды