23
Serial Control Via LAN Port Control Setup:
The LAN /Ethernet port can be used to control the matrix. A Moxa
NE-4100 embedded device servers is used to achieve this. The
NE-4100 support 10/100 Mbps Ethernet, and provide ready-to-use
operation modes, including TCP Server, TCP Client, and UDP. This
devices enables sending serial commands to the HD4XSTPMX using
the LAN port. Once connected, and configured the RS-232
commands can be sent to control the HD4xSTPMX.
Complete detail instructions on using the NE-4100 can be found
here:
http://www.moxa.com/doc/manual/NE/4100/v6/NE-4100_Series_Use
rs_Manual_v6.pdf
To Use the LAN port for serial control you may follow these
instructions.
Step
Serial Control Via LAN Port
1
Connect Ethernet cable to the LAN Port of the Matrix and
your LAN
2
Set Matrix to LAN serial port control. See page 21
3
Download and Install "NPort Windows Driver Manager
(WHQL certified)"on the PC that will be used to control the
matrix.
Download Link below:
NPort Windows Driver Manager
http://www.moxa.com/support/download.aspx?id=974
4
Open and Run the "NPort Driver Manager"
Continued on next page...