12
Language Toggle
This setting allows users to touch a button on the Home screen and select the language of
their choice from the available language options. User selection of a different language
does not change the language for administrative or system screens; it changes only the
user view. The factory default setting is “OFF”. Set to “ON” to enable this feature and
show the Language button on the Home screen. (Available in some software versions.)
CROSS CiRCUIT
(excluding xR6000)
Select “OFF” to disable the CROSS CiRCUIT Pro programs (for use with the optional
CROSS CiRCUIT Pro Kit). Factory default is “ON”.
CROSS CiRCUIT
Attract Screen
(excluding Zero
Runner, xR6000)
When CROSS CiRCUIT is enabled, this setting allows you to change the Home screen
to a video highlighting the availability of CROSS CiRCUIT workouts. Set to “ON” if you
want to display this optional Home screen; factory default is “OFF”.
Default Stride
(XT-One, XT4700)
Set the default stride length of the unit to any value between 20” and 28” (51-71 cm) in
1/2” (1 cm) increments. The factory default setting is 24“ or 59 cm..
Default Incline
(XT-One only)
Set the default incline of the unit to any value between 1 (least incline) and 10
(steepest). For programs other than the preset Quick Start programs, the factory default
setting is 1.
Default Width
(LX8000 only)
Set the default lateral width of the unit to any value between 1 (narrowest) and 10
(widest). For programs other than the preset Quick Start programs, the factory default
setting is 1.
Stride Length
(XT3700 only)
The XT3700 features a mechanically adjustable stride linkage, either “JOGGING”
(shorter stride length) or “RUNNING” (longer stride length). The preferred length is
selected and set during installation, and the stride length in the console software must
be set to the same setting as the physical linkage. The factory setting is “RUNNING”;
if your machine is adjusted to Jogging stride at installation, this console setting
should also be set to “JOGGING”. You should not change it again unless the physical
configuration of the unit is also changed.
TV
Set to “ON” if you have a Personal Viewing System (PVS) accessory attached. The
factory default setting is “OFF”.
900 MHz
Set to “ON” if you have a 900 MHz audio accessory installed. The factory default
setting is “OFF”. (Available in some software versions.)
Touch
Reset Machine Settings
to restore original settings.
Use
Import All Settings
and
Export All Settings
to copy
all
the Club Settings to multiple units. Use
Import
from USB
and
Export to USB
for copying the settings
on this screen only
to multiple units. See “Setting Up
Multiple Units” for detailed instructions.
If you want to use custom TV or internet icons when setting up your TV or internet screens, insert a blank USB
device, and touch
Format USB
. This creates a directory structure into which you can place files containing icon
images that you may then select when setting up the internet or TV.
Note: Only .jpg or .png file formats are
accepted, and icons that are not square will be truncated. For best results, icon should be at least 200
x 200 pixels.
Touch
Save & Exit
in the lower right corner to save your selections, or select another tab for more settings.
Содержание ZERO RUNNER ZR7000
Страница 1: ...CONSOLE GUIDE SETUP INSTRUCTIONS SMART CONSOLE ...
Страница 2: ...ii ...