1 - Prep the Furniture
Remove all packaging materials from the seat base and the seat back.
Please read all instructions carefully before starting the assembly. It is recommended using two adults throughout the
process.
2 - Attach the Seat Back
Slide the metal female receivers located on both sides of the seat back onto the male steel mechanism posts attached to
the seat base. With both hands, firmly push down on the seat backs to lock them into place.
3 - Apply Rubber Foot Pads
Locate the small bag of round rubber foot pads sent with your theater seats. If placing the seats on a hard surface
floor, apply the rubber pads to the bottom of all plastic feet. This will prevent the seats from sliding. Failure to follow this
instruction can cause scratches to your floor. This step is not necessary if the seats are placed on a carpeted floor.
GET
READY
Unpack the box
Seat Base
Seat Back
Rubber Foot Pads
