octanefitness.com
Latin America/Asian Pacific
USA & Canada
001-763-757-2662
888-OCTANE4
Europe/Middle East/Africa
Version 1 © Dec 2013 Octane Fitness. All rights reserved.
31-10-2662412
Q37x/Q37xi Service Guide
Installing the Console Back Cover
The back cover is secured by five (5) screws and by five (5) plastic tabs that snap the cover into place.
Follow these instructions to carefully install the back cover without breaking the tabs or stripping the threads on the screws:
1. Position the console back cover at an angle with the bottom two tabs
aligned in the console bottom.
2. Carefully press the console back cover up and snap the three top tabs
into the console cover.
3. Insert the CENTER SCREW first. This screw goes straight in; do not
insert at an angle. Tighten.
4. Insert the remaining four (4) screws at an upward angle. (If you insert
them straight in you will strip the threads.) Tighten.
e
e
d
c
