32
Heart rate readout seems
inaccurate (too high or too low)
Chest strap
•
There may be interference with another electrical product (lights, TV,
personal stereo, wireless network, MP3 players, phones, etc.). Turn off any
other electrical product to see if there is interference.
•
Put water between your skin and the ribbed electrodes on the back of the
chest strap. This can improve the electrical connection.
•
Another person in the same workout area may be wearing a chest strap.
Have the person relocate to a distance of 3-4 feet away if possible.
•
The chest strap may be too loose. Adjust the elastic strap so that the strap
is snug against your body.
•
Have someone else try the transmitter to see if the reading seems accurate
for him/her.
Contact heart rate sensors
•
Make sure you are grasping the grips firmly and steadily.
•
Have someone else try the grips to see if the reading seems accurate for
him/her.
•
If the issue persists, contact your local dealer for service.
Console blinks on / off
•
The console connections could be faulty. Refer to the assembly instructions
and check connections.
•
If the issue persists, contact your local dealer for service.
LED always toggling
•
Press Display Lock to stop the LEDs from toggling.
Console LEDs are not bright
enough
•
Enter User Set-up by pressing the Up Arrow (
) and Down Arrow (
) keys
for three seconds, or until you hear a beep.
•
Press
the Up Arrow (
) or Down Arrow (
) key until “BRIGHTNESS”
displays in the Message Center.
•
Press Enter until the LEDs are set at the desired brightness (1-8, with 8
being the brightest).
•
Press
the Up Arrow (
) or Down Arrow (
) key until “EXIT” displays in the
Message Center, then press Enter.
•
If the brightness is set to “8” (the brightest level) and the LEDs are still dim,
contact your local dealer for service.
Console does not “beep” when
buttons are pressed
•
Enter User Set-up by pressing the Up Arrow (
) and Down Arrow (
) keys
for three seconds, or until you hear a beep.
•
Press
the Up Arrow (
) or Down Arrow (
) key until “BEEP” displays in the
Message Center.
•
Press Enter until “ON” is displayed.
•
Press
the Up Arrow (
) or Down Arrow (
) key until “EXIT” displays in the
Message Center, then press Enter.
•
If “BEEP” is set to “ON” and the console still does not beep, contact your
local dealer for service.
