19
4.
Choose Go to Stored Position from Positioner Command to rotate
the dish, so that it faces the target satellite.
5.
Place the focus on Move and press the left or right navigation
button to finely drive the dish east or west for the best signal. The
dish rotates continuously as long as either of these buttons is
held down.
6.
Choose Store Satellite Position from Positioner Command to save
the dish’s current position for the target satellite.
It may be useful to set limits to the movement scope of the dish for easier
manipulation. Repeat these steps two times to set a limit position for the
east and the west.
1.
Choose
Go to Reference
from
Positioner Command
for the dish
to return to the reference point.
2.
Place the focus on
Move
and press the left or right navigation
button to drive the dish.
3.
Choose
Set East
(soft) Limit
or
Set West (soft) Limit
from
Positioner Command to save the dish’s current position to use it
as a limit position.
Choosing Disable (soft) Limits from Positioner Command clears these limit
positions.
Using USALS
Open the apps screen and select
Settings
>
Positioner Setting
. Set
Positioner
to
USALS
and then specify these items correctly:
Dish Longitude: Enter the longitude where the dish is located.
Dish Latitude: Enter the latitude where the dish is located.
Give the dish a test run to see if it works properly. Repeat these steps for
every desired satellite.
