17
On this screen, users can change satellite and transponder data.
Rename a satellite
: Choose Satellite and select a satellite. Press the red
button and then enter a new name using the on-screen keyboard.
Edit a satellite’s longitude
: Choose Satellite and select a satellite. Press
the green button and then modify the longitude.
Clear all transponders of a satellite
: Choose Satellite and select a satellite.
Press the yellow button and then confirm to clear them.
Add a transponder
: Place the focus on Frequency and press the green
button. Specify the frequency, symbol rate, and polarization.
Edit a transponder
: Choose Frequency and select a transponder. Press the
yellow button and then modify the transponder’s details.
Delete a transponder
: Choose Frequency and select a transponder. Press
the red button and then confirm to delete it.
Unicable Settings
If the user’s house is equipped with a single cable router, configure
unicable settings properly.
Open the apps screen and select Settings > Dish Setting. Set LNB Type to
Unicable and then choose Unicable Setting. Choose Config Mode and
determine whether to scan for all available channels or a specific channel.
Specify the details, such as port and predetermined intermediate
frequency.
