F. Advance Setting
[ I : Press Menu key > USER SETUP > Advance
Setting ]
-
LNB Power
(ON/OFF)
-
LNB Voltage
(13/18V, 14/19V)
-
Front Panel Button
: you can set ON/OFF about
Front Panel Button working
-
Audio Volume
(Main/Channel) :
*Main Volume : all channels controlled by current
volme setting.
*CH Volume : Each channel is setting difference
volume by current volume status.
-
Deep Standby
(ON/OFF) : Standby mode is
controlled by this mode.
-
Deep Standby Offset
: If you go to deep standby,
and setting event timer, Micom counted timer so you
can setting error time per hour.
-
Booster
(ON/OFF) : Booster power on/off
G. PVR Setting
[ I : Press Menu key > USER SETUP > PVR Setting ]
You can change the PVR configuration in this menu.
-
Time Shift
: Configuration for recording the current
channel automatically. If you set Time Shift to Enable (1
or 2 Hour). You can use time shift without recording a
channel explicitly.
-
Recording Storage
: Configuration for selecting the
recording device. If you attached the storage-SATA,
USB-device, then you can select the default recording
device.
-
Recording Duration
: Configuration for default user
record duration. If you select 2 Hour, then you can
record a 2-Hour of channel when you record.
-
Auto File Delete
: “NO”, Less 1-5 Minute
NO : No delete record channels.
Less 1-5 Minute : if you select this option, when you
are recoding channel, and then this channel duration is
shorter then selected time option, It is deleted recoded
channel automatically.
IV. System Configuration
29
