OCL DLC-1.1, Руководство пользователя, Страница: 8 / 10

10．. HUM CALIBRATE
Press setting key, choose “HUM CALIBRATE”, now, the controller will display the
correct humidity. You can change the setting “HUM CALIBRATE” with the up and
down key. After confirmation, press the setting key and return to the main menu.
If not, please press ESC key.
HUM CALIBRATE rate: ±15%
11．. TEMP CALIBRATE
Press setting key, choose “TEMP CALIBRATE”, at this time, the controller will display the correct
humidity. You can change the setting “TEMP CALIBRATE” with the up and down key.
After confirmation, press the setting key and return to main menu. If not, please press ESC key.
Temp. Calibrate: ±12.5
12. CO2 AUTO CALIBRATE
Press setting key, choose “CO2 AUTO CALIBRATE”, before calibrate, please put CO2 sensor to
the outside bout for 5 minutes, then choose YES, press setting key again and return to the main
menu. If not, please press ESC key.
13. CO2 MANUAL CALIBRATE
Press setting key, choose “CO2 manual CALIBRATE”, the controller will now show the correct
value. Then you can calibrate the CO2 value with the up and down key. After confirmation, press
setting key and return to the main menu. If not, please press ESC key.
14. CO2 SET PPM
Press setting key, choose “CO2 SET”, press setting key again, you will enter the CO2 setup.
Then you can set CO2 with the up and down key. After confirmation, press setting key and
return to the main menu. If not, please press ESC key.
CO2 rate: 0-2750ppm