OCL DLC-1.1, Руководство пользователя, Страница: 5 / 10

TEMP: SENSOR FAILURE OFF
HUM : SENSOR FAILURE
CO2 : SENSOR FAILURE OFF
2016/10/28 17:20:20
II. CONTROL KEY
Display screen of
connect sensor
I. PREPARATIONS BEFORE USE
Set the controller output mode to “OFF”, to ensure that it will not be accidentally
activated during the controller setup.
III. FUNCTION OPERATIONAL SPECIFICATION
1. OUTPUT SELECT
In the main menu, press setting key, set the “OUTPUT SELECT”, press set key again, you can
change the “OUTPUT SELECT” to the “AUTO”, “OFF” or ”ON” function by pressing the up and down
key. Then press the set key, this will confirm the function and return to the main menu.
If not, please press ESC key.
AUTO：
Auto save dimming function
OFF： Closed output
ON： Opened output
2. OUTPUT POWER
Press setting key, choose “OUTPUT POWER”, press setting key again, you can change the
“OUTPUT POWER” by the up and down key. Then, press setting key again, this will confirm the
function and return to the main menu. If not, please press ESC key. Power setting rate: 50%-115%
In the main menu, press modes key, enter the “OUTPUT POWER” directly.
OUTPUT SELECT
OUTPUT POWER
LIGHT TIMER
AUX SELECT
Main menu
TEMP: 27.4 °C OFF
HUM : 52%
CO2 : 428 ppm OFF
2016/11/02 10:33:46
Display screen of disconnect
sensor
“Failure” : disconnect
sensor or connection doesn’t
work.
UP SET DOWN ESC MODES