
BUILT IN CONSTRUCTION DETAILS
18
The grill is designed for easy placement into masonry
enclosures. For non-combustible applications, the grill drops into
the opening shown at right and hangs from the trim kit (optional)
flanges. A deck is not required to support it from the bottom. If
you’re using an insulation jacket in combustible enclosures, the
jacket assembly must be supported from the bottom by a ledge
down each side or a solid deck beneath the entire jacket.
Review the detail drawings and take into account the
provisions shown for gas line hook-up clearance in the left rear
corner. It is recommended that ventilation holes are provided in
the enclosure in the event of a gas leak. The supporting ledges or
deck must be level and flat. The counter should also be level.
Insulated Jacket:
Do not build the grill under overhead unprotected com-
bustible construction. If the grill is to be placed into a com-
bustible enclosure, an OCI insulated jacket is necessary and is
available from your dealer. Use only Outdoor Concepts Inc. insu-
lated jacket which has specifically been designed and tested for
this purpose.
IMPORTANT: Gas fittings, regulator, and installer sup-
plied shut-off valves must be easily accessible.
Standard layout for non-combustible enclosure:
Insulated Jacket layout for combustible enclosure: