Ochsner AIR 85, Руководство по проектированию и установке

Страница: 20 / 56

20 www.ochsner.com | 00_200_202_03_01_002_AIR85-EN
Machine-specific engineering and preparation
Fittings
Requirement
AIR 85 Max. permissible operating pressure 45 bar
Max. permissible temperature 65°C
Used with refrigerant R410A
8.3 Indoor unit
»
Do not install the indoor unit in a building of light-
weight construction (floors and walls).
Information
The heat pump installation should be sound insu-
lated with sound insulation underlay and flexible
connection hoses.
8.3.1 Minimum clearances
8.3.2 Minimum area of clear floor space in the
installation room
Each refrigerant requires a minimum area of clear floor
space in the installation room.
Information
The minimum area of clear floor space in the in -
stallation room varies depending on the country.
»
Observe all applicable national and regional
regulations and provisions.
Information
If the installation area is too small, the following
measures may help:
- Enlarging the space by creating a network of
rooms
- Mechanical ventilation
WARNING
Refrigerant escaping into spaces that are too small
poses a suffocation hazard.
»
Do not block door gaps and ventilation open-
ings used to enlarge the space.
8.4 Preparing the electrical connection
WARNING: Electrocution
All electrical connection and installation work must
be carried out according to the applicable national
and regional regulations.
WARNING: Electrocution
Before commencing electrical connection and
installation work, the heat pump system must be
isolated from the power supply.