Document UT-MT-0573
Page 3 of 28
Edition 03/13/2012
Supersedes edition 02/09/2010
SLTH – SEMI-FLUSH THRESHOLD LIGHT
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE
LIMITED PRODUCT WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE.
OCEM warrants to each original Buyer of Products manufactured by the Company that such Products are at the time of delivery to
the Buyer, free of material and workmanship defects, provided that no warranty is made with respect to:
(a) any Product, which has been repaired or altered in such a way, in Company’s judgement, as to affect the Product adversely;
(b) any Product which has, in Company’s judgement, been subject to negligence, accident or improper storage;
(c) any Product which has not been operated and maintained in accordance with normal practice and in conformity with
recommendations and published specification of Company; and,
OCEM’s obligation under this warranty is limited to use reasonable efforts to repair or, at its option, replace, during normal working
hours at the facility of the Company, any Product which in its judgement proved not to be as warranted within the applicable warranty
period. All costs of transportation of Products claimed not to be warranted and of those repaired or replaced, to or from the facility of
the Company shall be borne by Purchaser. Company may require the return of any Product claimed not to be as warranted to its
facility, transportation prepaid by Purchaser, to establish a claim under this warranty. The cost of labour for the installation of a
repaired or replaced Product shall be borne by Purchaser. Replacement parts provided under the terms of this warranty are
warranted for the remainder of the warranty period of the Products upon which they are installed to the same extent as if such parts
were original components thereof. Warranty services provided under the Agreement do not assure uninterrupted operations of
Products; Company does not assume any liability for damages caused by any delays involving warranty service.
IMPORTANT: READ THIS DOCUMENT
Before proceeding to the operations of installation, commissioning, operation, maintenance or disposal, carefully read the entire
document.
SAFETY INFORMATION
Extreme caution should be exercised when working with this equipment; it is normally used or connected to circuits that operate at
dangerous voltages and can be fatal.
The following section contains important safety information that you must follow when installing and using the apparatus.
Misuse of the equipment or lack of care in applying safety procedures and prescriptions specified in this document, may result in a
hazard.
Avoid contact with voltage or current sources.
For no reason the protections and the safety devices must be removed.
OPERATION ON THE EQUIPMENT - SKILLS
Operation on the equipment and access to its internal parts shall be done by experienced personnel, adequately trained and aware
of the risks related to electricity and high voltages.
Safety rules shall be adopted when operating on the equipment, or on cables and other apparatus connected to the it.
DO NOT OPERATE ON ENERGIZED CIRCUITS
Do not carry out any operation on the converter or on apparatus connected to it when the circuits are energized.
