X-SERIES
X4 / X8 / X16
.
INSTALL & OPERATION MANUAL
17
Diagnostic LEDs
The X-Series is fitted with an advanced diagnostic indicator system. The X-Series X4 Colours have one small orange
diagnostic LED, while the rest of the X-Series lights have two small indicator LEDs (one red and one orange) within the
unit, visible through the front lens.
X-Series X4 Colours (One Diagnostic LED):
When the X-Series X4 Colours unit is first turned on, the single orange diagnostic LED will flash briefly. This is normal
operation and is part of the start-up procedure, to show that the LED is functioning. During normal operation the
diagnostic LED should not be illuminated. Please see the table in chapter 6.1 for more details.
X-Series lights excluding X4 Colours (Two Diagnostic LEDs):
When the unit is first turned on, both red and orange indicator LED's will flash briefly. This is normal operation and is
part of the start-up procedure, to show that the LEDs are functioning. During normal operation, the indicator LEDs
should not be illuminated. Please see the table in chapter 6.1 for more details.
5.2 MAINTENANCE
Marine growth can build up quickly on the light and can reduce the
light’s performance in just a few weeks.
To help prevent this, all OceanLED lights have been coated with a specialized Tritonium® coating which helps to
prevent marine growth from adhering to the glass. Lights should be cleaned with a boat brush or similar bi-weekly, or as
needed to keep the lens of the light clean.
Growth varies greatly around the world and maintenance is imperative to the proper operation and longevity of the
product. If heavy fouling occurs, growth can be removed from the lens using a plastic scraper and moderate pressure
under water. If cleaning the lens while the boat is out of the water, wet the lens before scraping. Never scrape or try to
remove barnacles from a dry lens.
Harsh cleaning solvents will damage the light and Tritonium coating.
Never use high pressure jet wash to clean the lens / bezel as this will damage the seals and void the warranty.
Corrosion of wire, and/or water ingress into the light unit via cable is NOT covered under warranty.
5.3 REPLACEMENT PARTS
The light source of this luminaire is not replaceable; when the light source reached its end of the life the whole luminaire
shall be replaced.
If the external flexible cable from the back of the light is damaged, contact your local OceanLED representative to
arrange for replacement (cable must only be replaced by OceanLED, service agent or a similar qualified person).
Lost, broken and worn parts can be replaced on request and can be obtained through your local OceanLED
representative.
