EXPLORE
E3
.
2021 INSTALL & OPERATION MANUAL
9
10. Connect the bonding cable to the remaining screw and lock in place with the nut and shake proof washer
provided. Tighten the locking screw using a 5mm Allen key, applying thread lock at point of thread contact
with locking ring.
BONDING:
The light
MUST
be attached to the vessels bonding / cathodic protection system. Once fitted it
is mandatory to check that there is full continuity between the vessels cathodic protection system and the
outer bezel of the mounting tube assembly (see bonding schematic
– Appendix Chapter 7).
