1
www.regentlight.co.za
INSTALLATION INSTRUCTIONS
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
1
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Regent Lighting reserves the right to change specifications modify designs
and discontinue items without incurring obligation and whilst every effort is
made to ensure that descriptions, specifications and other information in
this catalogue are correct, no warranty is given in respect thereof and the
company shall not be liable for any error therein.
WARNING:
TO AVOID FIRE, SHOCK OR DEATH
TURN OFF POWER
AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS
OFF BEFORE WIRING
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS
ARE IN COMPLIANCE WITH SANS 60598 SECTION 3.5.6 ACCORDING TO THE
MANUFACTURER GUARANTEE AND WARRANTY
Electrical products can cause death, injury, or
damage to property. Installation of this
product must be carried out by a qualified
electrician, in compliance with SANS 10142 or
corresponding regulations of the country of
installation. On completion of installation, the
Certificate of Compliance must be updated.
Sliver Bollard - Plinth Mounted
Electronic Control Device
WARNING
Electronic Control Device
WARNING
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : +27 11 474 0171
www.regentlight.co.za
REGENT LIGHTING A DIVISION OF WAHL
INDUSTRIES.
DO NOT CONNECT THE FITTING LIVE
November 2017
Requirements:
Be sure the electricity to the system you are
working on is isolated.
If the main supply power (live) is on, it will cause
damage to the luminaire.
1. Ensure the pole is installed correctly.
A.
Ensure the electrical cable is fed through the 250mm deep
hole.
B.
Insert and secure the bolt cage into the hole and feed the
electrical cable through the bolt cage towards the surface,
ensuring the cable is fed parallel to the pathway.
C. Feed the cable through the stubby to the cable joint kit.
Save These Instructions for Future Reference
Save These Instructions for Future Reference
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Sliver Bollard - Plinth Mounted
Ground Level
Bolt Cage
Stubby
LIGHT SOURCE
LIGHT SOURCE
Ground Level
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
A
B
C
5
5. Switch on the power
supply.
250mm
390mm
25mm
