EXPLORE
E7
2 0 1 9 I N S T A L L & O P E R A T I O N M A N U A L
6
3
Installation
3.1 Installing the Light Fixture (Hull thickness up to 55mm)
Additional Tools needed that are not supplied by OceanLED
Marine sealant - 3M 4200 or equivalent
Cable
ties
Waterproof Cable Connectors / Junction Box (optional)
Allen key (5mm)
Thread lock - Loctite 243 or equivalent.
DO NOT remove the light cartridge from the mounting tube during installation. The light cartridge MUST stay
fitted inside the mounting tube throughout the installation process to avoid the introduction of potential
contaminants that may damage the product. The light cartridge can only be removed for maintenance or after
sales purposes and OceanLED must be contacted prior to any light cartridge being removed from the
mounting tube.
OceanLED recommends dry fitting all products. When installing, be sure that the light fits the area and
secures to the hull using the appropriate hardware before applying any sealant.
When applying sealant to the light fixture, use OceanLED packaging material such as the light cardboard box
when placing the light on the ground face down to prevent lens damage.
Explore E7
Kit Includes
Explore E7 Light
Clamping Kit
Removal Tool
