2
IMPORTANT
:
Please read the instructions completely before proceeding with the installation. These
instructions supersede any other pre dated instructions if they differ.
Chapter 1
.......................................................................................................................................................................................................4
An overview of the underwater light installation. It includes sections on unpacking and inspecting the
components, selecting the mounting site and a description of how best to make the cable runs.
Chapter 2
...................................................................................................................................................................................................... 7
Detailed instructions on how to mount and connect each type of light.
Chapter 3
.....................................................................................................................................................................................................12
Operating the light
Chapter 4
....................................................................................................................................................................................................13
Maintenance and troubleshooting tips.
WARNING!
Never use solvents!
Cleaners, fuel, paint, sealants, and other products that may
contain strong solvents, such as acetone, that attack many plastics greatly reduc-
ing their strength and irreversibly damaging the special Tritonium coating and cable
sheathings.
WARNING!
Light is for mounting directly to a flat surface, with the cable passing through a 1/2"
– 5/8" (12 - 15mm) hole.
Do not submerse your cable ends in water; cable and
connections exposed to underwater submersion will not be covered by warranty.
Mounting the light in any other configuration, other than those described in this
guide, will invalidate its warranty.
