13
13
4
CHAPTER
FOUR
Chapter 4: Maintenance and troubleshooting
4.1 - Cleaning Instructions
Sea growth can collect quickly on the light and this can reduce the performance in just a few weeks. To
prevent the build-up of sea growth, all OceanLED lights have been coated with a specialized Tritonium
coating which makes the surface of the lens a non-stick layer which helps ward off long term barnacle
buildup. Lights should be cleaned with a boat brush or similar biweekly or as needed to keep the lens
of the light clear. Growth varies greatly around the world and maintenance is imperative to the proper
operation and longevity of the product. If heavy fouling occurs, barnacles can be removed from the lens
using a plastic scraper and moderate pressure. This can be done in the water using a plastic scraper. If out
of water, moisten the growth before wiping.
CAUTION:
Harsh cleaning solvents will damage the light and Tritonium coating.
4.2 - Replacement Parts
Lost, broken, and worn parts can be replaced on request and can be obtained through your local
OceanLED representative.
If the external flexible cable of this unit is damaged, contact your local OceanLED representative to arrange
for replacement (cable must only be replaced by OceanLED, service agent or a similar qualified person).
