5
1.5 Amphibian Accessories
MOUNTING BRACKETS -
•
Mount your OceanLED Amphibian Classic or Amphibian T-Series lights
almost anywhere! Screw fix or zip tie to t-tops, spreaders, outriggers,
pontoons, masts, trailers, engine cowlings, on deck, as well as in
landscape applications or for wall-wash effects.
(Not intended for
use underwater, nor for use with Amphibian Pro Series which are for
underwater mounting only).
•
Available in white or grey polymer to suit a wide variety of applications,
and in 3 sizes compatible with OceanLED Amphibian T-Series LED
lighting.
•
316L Stainless Steel bolts and nylon nuts
CLAMP FOOT -
•
The Clamp Foot Assembly, when used in conjunction with Amphibian
Bracket Accessories, allow for affixing to round pipe.
•
Available in white or grey polymer to suit a wide variety of applications,
and in 3 sizes compatible with OceanLED Amphibian Classic and
Amphibian Trailer Boat Series LED lighting.
•
316L Stainless Steel bolts and nylon nuts
REMOTE -
•
The Remote System allows you to control up to 4 OceanLED lights per
receiver (multiple receivers can be used to control more lights) on your
boat from a distance of up to 100 yards away. The remote system can
be used as a general purpose remote switching unit and can be used to
control your Underwater Lights, Deck Lights, Flood Lights, Dock Lights
and more.
•
This rugged IP67 remote control system is easy to install via screw
terminals for power and outputs. Each receiver has 4 relay outputs,
each capable of switching up to 250 watts.
•
Additional transmitters may be added using the 'easy-team' process;
any button on the transmitter can be used to control one or many
outputs of the receiver.
JUNCTION BOX -
•
For a more professional watertight connection for your Amphibian
lights, use the junction box to connect up to 4 lights in an IP68
enclosure.
•
All lights are individually fused within the junction box again adding to
speed and cleanliness of installation.
Products may vary from image shown.
OceanLED INSTALL / AMPHIBIANS / 053014 / v4.2
