2
IMPORTANT
: Please read the instructions completely before proceeding with the installation. These
instructions supersede any other instructions if they differ.
Chapter 1
.......................................................................................................................................................................................................4
An overview of the underwater light installation. It includes sections on Unpacking and Inspecting the Com-
ponents, Selecting the mounting Site and a description of how best to make the Cable Runs.
Chapter 2
......................................................................................................................................................................................................8
Detailed instructions on how to mount and connect each type of light.
Chapter 3
.................................................................................................................................................................................................... 14
Maintenance and troubleshooting tips.
Chapter 4
................................................................................................................................................................................................... 16
Warranty statement.
PRETEST
Always test the lights prior to installation. Failure to do this may result in additional installation time and
could invalidate the warranty.
GENERAL
OceanLED underwater lights are generally used for illuminating the water around a boat or yacht. Best
placement for achieving the best results are described in selecting the right location.
WARRANTY COVERAGE
2 year warranty from time of purchase, regardless of installation.
WARNING!
Never Use Solvents!
Cleaners, fuel, paint, sealants, and other products that may con-
tain strong solvents, such as acetone, that attack many plastics greatly reducing their
strength and irreversibly damaging the special lens coatings and cable sheathings.
WARNING!
Light is for mounting directly to a flat surface on the hull, with the cable passing
through a 3/8" (9mm) hole in the hull.
Do not submerse your cable in water; cable
and connections exposed to underwater submersion will not be covered by warranty.
Mounting the light in any other configuration, other than those described in this
guide, will invalidate its warranty.
OceanLED INSTALL / AMPHIBIANS / 053014 / v4.2
