3
IMPORTANT SAFETY PRECAUTIONS!
!
IMPORTANT NOTICE
:
Attention Installer:
This manual contains important information about
the installation, operation and safe use of this product. This information should be given to the owner and/
or operator of this equipment.
!
WARNING
-
Before installing your OceanLED Light, read and follow all warning notices and instructions
which are included. Failure to follow safety warnings and instructions can result in severe injury, death, or
property damage.
!
WARNING
-
Before installing your OceanLED Light, check local laws for restrictions regarding the use of
colored lights in your area.
!
WARNING
- Not suitable for use as on docks, piers or pilings.
See our Dock Light products.
!
DANGER! Risk of Electrical Shock or Electrocution!
This underwater light must be installed by a Licensed Marine Electrician in accordance with ABYC
(American Boat and Yacht Council), NMMA, and any other applicable standards. Improper installation
will create an electrical hazard which could result in death or serious injury to swimmers, installers, or
others due to electrical shock, and may also cause damage to property. Always disconnect the power
to the light at the circuit breaker before servicing the light. Failure to do so could result in death or
serious injury to serviceman, swimmers or others due to electrical shock. READ AND FOLLOW ALL
INSTRUCTIONS IN THIS MANUAL.
!
WARNING Important Safety Information for OceanLED Lights
!
WARNING
-
Salt is an inherently corrosive material. Metal parts and certain natural and man-made
surfaces are particularly susceptible to corrosion and deterioration when used in and around salt water.
OceanLED Amphibian Lights are 99.9% plastic and polymer products and impervious to salt water
corrosion, however, screws and fasteners used for the installation must be of a marine grade type stainless
steel or equivalent and monitored annually to ensure the lights remain in service for years to come.
OceanLED INSTALL / AMPHIBIANS / 053014 / v4.2
-
