Oceanic OCEASHS50IFW2, Руководство пользователя, Страница: 21 / 217

GB
18
CHRONO
In this mode, you can select one of the three pre-
set chrono-thermostat programs or the custom
program. The latter lets you set a daily and weekly
program with two temperature levels (”Comfort”
DQG©²1LJKW(FR²
All “Pilot Wire“ commands are disabled.
ENERGY SAVING
This mode reduces the appliance’s energy con-
sumption when the room is left unoccupied. Tem-
SHUDWXUH©LV©½[HG©DW©©ƒ&©
All “Pilot Wire“ commands are disabled.
Users can only set the “Comfort“ temperature
on the appliance.
Select the desired temperature set point by
using the “+“ or “-“ keys.
7KH© KRPH© PXVW© EH© ½WWHG© ZLWK© DQ© DXWRPDWLRQ© V\VWHP© VXS -
porting this type of technology. In this case, correct trans-
PLVVLRQ©RI©WKH©SURJUDPPLQJ©FRPPDQGV©FDQ©EH©YHUL½HG©XV -
ing the following diagram according to the mode set:
If the Pilot Wire programmer is not connected, “Comfort” op-
erating mode is selected automatically.
The icon showing the mode selected on the control unit
6WDQGE\© &RPIRUW© 1LJKW(FR© $QWLõ)UHH]H© LV© GLVSOD\HG© WR
-
gether with the icon.
Mode Comfort
1LJKW(FR
(Comfort
-3,5 °C)
Anti-Freeze Standby
Comfort
-1 °C
Comfort
-2 °C
Signal to be
transmitted
Voltage
between
Pilot Wire and
neutral wires
0 volt 230 volt
115 volt
Negative
115 volt
Positive
230 volt For
an interval
of 3 s
230 volt For
an interval
of 7 s
When the icon is displayed on the LCD, the heat-
ing element is on.
4.2.1 PILOT WIRE
To activate the “Pilot Wire“ mode:
Press the “Mode“ selection key until the icon
appears on the LCD.
4.2.2 COMFORT
The “Comfort“ temperature set point is the temperature
desired by the user.
Press the “Mode“ selection key until the icon
appears on the LCD.
Select the desired temperature set point by
using the “+“ or “-“ keys.
The temperature can be choosen in the inter-
val between 7 °C and 32 °C.
4.2.3 NIGHT/ECO
,Q©±1LJKW(FR±©PRGH©WKH©WHPSHUDWXUH©VHW©SRLQW©PXVW©QRW©EH©
higher than “Comfort“ temperature set point. If the “Com-
IRUW²©WHPSHUDWXUH©LV©VHW©EHORZ©WKH©±1LJKW(FR²©WHPSHUDWXUH©
the latter will be automatically adjusted accordingly.
4.2.4 ANTI-FREEZE
,Q©±$QWLõ)UHH]H±©PRGH©WKH©WHPSHUDWXUH©VHW©SRLQW©LV©½[HG©DW©
7 °C. The appliance starts heating when room temperature
goes under 7 °C and with low energy consumption it pre-
vents the room temperature to reach the freezing point.
Press the “Mode“ selection key until the icon
appears on the LCD.
This operating mode is recommended when no people is in
the room for more than 1 day.
Press the “Mode“ selection key until the icon
appears on the LCD.
Select the desired temperature set point by
using the “+“ or “-“ keys.
The use of this operating mode is recommended in night-
time hours and in case no people is in the room for more
than 2 hours.
ANTI-FREEZE
In “Anti-Freeze“ mode, the temperature set point
LV©½[HG©DW©©ƒ&
The appliance starts heating automatically when
the room temperature drops below 7 °C.
All “Pilot Wire“ commands are disabled.