Oceanic GEO, Руководство по эксплуатации

Страница: 32 / 75

32
GEO AIR OPERATING MANUAL
© Oceanic, 2022 Doc. No. 12-5673-r05 (10/11/22)
LOG
The log stores Information from the latest 24 Dive and/or Gauge mode dives for viewing.
• If no dives are recorded, the message NONE YET will be displayed.
• After exceeding 24 dives, the most recent dive is stored while the oldest is deleted.
• Dives are numbered from 1 to 24 starting each time a dive is activated in either Dive (or Gauge) mode. After the post dive 24 hour period has
elapsed and the unit shuts off, the first dive of the next activation period will be recorded as dive #1.
• I n the event that Dive Time exceeds 199 min, the data at the 199 interval is recorded in the Log upon surfacing of the unit.
• The message GAUG (Gauge) or VIO (violation) will display, in the upper part of the screen, if applicable, on the Log Preview Screen.
NOTE: New data will automatically overwrite the oldest data in memory when the memory becomes full. If you do not
remember to log or download your dives, they will be lost when the memory overwrites. See the Download section of
this manual for instructions on downloading dives.
lowest
temperature
recorded elevation of
dive location,
SEA (or EL 2 - EL7)
SELECT
ADV
.
LIGHT
MODE
to Log Preview
LOG LEAD-IN LOG PREVIEW
Z2
SELECT
ADV
.
LIGHT
MODE
to Log Data 1
step forward
through log
records
step backward
through log
records
date of dive
dive #
dive
start time
SELECT
ADV
.
LIGHT
MODE
LOG DATA 1
to Log Data 2
max tissue loading,
blank if GAUGE
dive
max
ascent rate
max depth
elapsed dive time (min)
SELECT
ADV
.
LIGHT
MODE
LOG DATA 2
to Log Data 3
or back to
Log Preview
SELECT
ADV
.
LIGHT
MODE
LOG DATA 3
back to
Log Preview
highest PO
2
reached during
the dive
% O
2
Saturation
at end of dive, - - if the
dive entered
Violation Gauge
Mode
gas mix
FO
2
(% O
2
)
NOTE: Log Data 3 only displays for nitrox dives; it is bypassed if the dive was an air
dive.
pressure used
during dive, TMT 1
Surface Interval (hr:min),
- : - - if first dive