manualshive.com logo in svg

Oceanic DATA PLUS, Руководство пользователя

Поделиться
Скачать
Oceanic DATA PLUS Скачать руководство пользователя страница 76

®

66

ANNUAL DEALER INSPECTIONS & FACTORY SERVICE

As with all Oceanic instrumentation, the DataPlus should be inspected annually
by an Authorized Oceanic Dealer who will perform a factory prescribed function
check and inspection for damage or wear.

To keep the two year limited warranty in effect, this annual inspection must be
completed one year after purchase (

±

30 days).  Oceanic recommends that you

continue to have this inspection performed even after the warranty period has
expired to ensure your DataPlus is working properly.

A convenient service record is provided on page 94 in the Reference section.
This should be signed by the Oceanic Dealer service technician after each
inspection or factory service has been completed.  The cost of annual service is
not covered under the terms of the two year limited warranty.

WARNING:  If you are in doubt about the accuracy of your
DataPlus’ depth readings, DO NOT attempt to dive with it until it
has been inspected by an Authorized Oceanic Dealer.

The facility conducting the depth check must have a pressure test chamber that
is capable of pressurizing the DataPlus to its maximum operating depth (330
feet / 99.5 meters).  Also, the test gauge on the pressure test chamber must be as
accurate as the depth sensor in the DataPlus (

±

1% of full scale).

Be a -

RESPONSIBLE DIVER

at all times.

R

E

S

P

O

N SIBLE

D

IV

E

R

Содержание DATA PLUS











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды