Oceanic DATA PLUS, Руководство пользователя

Страница: 20 / 106

®
10
FT
O2
FT
MAX
GLO
DATA
PLUS
completing your ascent. Many divers do this to provide a wider zone of caution
from the no decompression limit.
If your depth or elapsed dive time are such that the TLBG enters the red decom-
pression (DECO) zone, the DataPlus will switch to the Decompression Dive
Mode (Fig. 13) signified with the flashing Decompression Dive Mode icon (Fig.
13a). A decompression stop ceiling will be indicated by the TLBG, and the Stop
Ceiling icon (Fig. 13b). Digital displays are current depth, current required
decompression stop depth and time for that stop depth, and total required ascent
time to the surface (that includes required decompression stop times and vertical
ascent time calculated for a rate of 60 feet (18 meters) per minute).
You must stay at, or slightly below, the ceiling stop depth indicated on
the digital display until the next shallower required ceiling stop depth
appears before ascending any further, or you will increase your risk of
decompression sickness.
After displaying the Decompression Dive Mode for 12 seconds an Alternate
Display (Fig. 14) appears automatically for 3 seconds. The alternate display
replaces required stop depth and time information with maximum depth and
elapsed dive time. Also, the Stop Ceiling icon is replaced by the Max Depth (Fig.
14a) and Elapsed Dive Time icons (Fig. 14b). The two displays will continue to
alternate while you are in the Decompression Dive Mode.
FT
O2
FT
GLO
DATA
PLUS
Fig. 14 - Decompression Dive
Mode (Alternate Display)
Fig. 13 - Decompression Dive
Mode
b
a
a b