manualshive.com logo in svg

Oceanic DATA PLUS, Руководство пользователя

Поделиться
Скачать
Oceanic DATA PLUS Скачать руководство пользователя страница 74

®

64

O2

GLO

DATA

PLUS

CARE AND CLEANING

The DataPlus is a sensitive electronic instrument.  Although it has been de-
signed to endure the rigors of diving, it still must be handled carefully to protect
it from shock, excessive cold or heat, direct sunlight, chemical attack, neglect
and tampering.

The console, wrist mount, or hose mount rubber boot that the module is carried
in will help protect it from damage.  Although the module housing is made of an
impact resistant resin that is extremely shock resistant, it is susceptible to
scratches and attack by strong chemicals.  If the face does become scratched,
Oceanic can replace it, although small scratches will naturally disappear under-
water.  For even more convenience and additional protection against scratches,
place a transparent Oceanic Instrument Lens Protector on the gauge face.
These, and other special accessories, can be purchased from your Authorized
Oceanic Dealer for your DataPlus and for many other instruments.

CAUTION:  Never spray aerosols of any kind on, or near, the
DataPlus.  The propellants may chemically attack the plastic.

If diving with a console version of the DataPlus, be careful not to leave it lying
on a boat deck where it might be damaged or exposed to direct sunlight.  Many
dive computers (and dive trips) are ruined by encounters between carelessly
tossed computers and weight belts or tanks.  If your console is attached to a tank

Lens Protector

(actually transparent)

Prevent

Scratches with

an Oceanic

Lens Protector

Содержание DATA PLUS











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды