powered by the inverter!
4F3: AC Panel 120/220 Volt Breakers
This section of the AC panel
provides standard 120-volt power
throughout the vessel, as well as 220 to
selected circuits. Below are described
each breaker’s circuits and its use.
After connecting to shore
power, if the Reverse
Polarity Light lights, it
indicates the shore power
supply is mis-wired, a very
dangerous condition that
could lead to an electrical
shock, and damage the
boat's underwater gear
through electrolysis.
Disconnect immediately if
this occurs and advise the
marina's officials at once!
The shore power switches are
arranged so that only the bow shore
power connector, the stern shore power
connector, or one of the generators can
be energized at one time. To operate,
turn the selector switch into the desired
position.
Both “Circuit 1" and “Circuit 2"
are required for operation of the entire
AC system
.
The boat’s 50-amp
connector is wired to energize both circuits.
Key:
“B” =
“Breaker”
“S”
= “Switch and Breaker”
“WL” = “Warning Light”)
“MS” = “Momentary Switch”
Green
= Leave on Always
Blue
= Leave on when Aboard
Yellow
= Use when Item is Needed
Red
=
Use with Caution in Exceptional
Circumstances
*
=
Can run on Inverter
“220V”
= This is a 220-volt item
Section 4F: Electrical Systems, AC 4.11
Содержание Grand Banks 49' Classic
Страница 14: ...Intentionally left blank Section 1B3 Gen l Description Safety Eq 1 12...
Страница 16: ...Intentionally left blank Section 2 Important Vessel Numbers 2 2...
Страница 50: ...Page Intentionally Left Blank...
Страница 60: ...13 5 10 13 6 11 12 7 9...