ATB1 USER MANUAL
14
912S-02692-1.11 18/07/2022
3.2 Using WiFi (An Internet connection is required)
Search for Ocean Signal AIS Config.
From the Google Play Store or the Apple App Store
Install the Ocean Signal App on your mobile device.
Set-up a WiFi connection with your mobile device (initial connection only)
•
Turn off the power to the ATB1.
•
Press and hold the LED button and turn on the power. Keep the button held
for 6 seconds until the LED turns Amber. Release the button and the LED will
remain, Amber blinking off every 2 seconds to indicate the ATB1 is in Wi-Fi
connection mode.
Open the App on your mobile device and available devices will be discovered (this may take
a few moments). Once the search has completed, select the ATB1 to pair with your mobile
device (for iOS only, this is automatic using Android).
Follow the instructions in the App to upload the vessel information to your paired ATB1.