Ocean Signal AIS-MOB1, Руководство пользователя

Страница: 7 / 20

MOB1 USER MANUAL
7 Version 01.00 13/02/2015
3. LIFE JACKET INSTALLATION
If your rescueME MOB1 is not already pre-installed into the lifejacket, please follow the
instructions below carefully. The diagrams below assume that the life jacket inflation tube
is on the left hand side (as viewed). If the tube is on the right hand side then the tape
should be fitted on the opposite sides shown
•
Slide the red arming tab down.
Carefully move the grey slide to just
expose the slot. Do not move it too
far otherwise the antenna will be
released.
•
Pass the loop of the strap
through the slot in the
activation clip and pass the
tape back through the loop.
Return the activation slide to
the centre and move the red
arming tab back to lock the
slide in place.
•
Take the bracket and pass the tape through the slots as shown below, making sure
that tape does not get twisted.
•
On completion, the tape should now be
connected to the bracket and MOB1 as
shown.